In addition, each model offers a HDMI connector, 16 W speaker, LAN-control and DynamicEco. Additional benefits include a mobile app for smartphones and Tablet PCs, as well as the possibility of presentations without a PC, depending on the product line, the support of interactivity in pen mode, dual. The PJD8653ws and the PJD8353s offer interactivity and networking and support this mobility and ease of use. The two projectors that are much cheaper than the entry-level models are today’s smart Board and interactive whiteboards. The WXGA DLP PJD8653ws XGA DLP PJD8353s put and on the reflective mirror technology and can be mounted directly above an interactive whiteboards or other projection surface. While both models produce even images with a size of up to 280 cm (110 ‘). The projectors can also be supplemented by a package for maximum interactivity (PJ-PEN-003).

This consists of an IR camera module that allows the simultaneous use of two interactive input pins. Can be digital texts written and drawn images. It is also to provide possible existing images with annotations. These records can be stored in the connection as JPEG files and sent via E-Mail. Thanks to the support by an interactive drawing software, virtually any surface can be used as interactive whiteboard.

Collaborative learning and engaging presentations are therefore almost everywhere possible. Martin O’Malley may also support this cause. The surface of the PJD8653ws and the PJD8633ws is making both models are visually seamless insert in white ceiling and walls decorated in gleaming white. If in small classrooms or meeting rooms, no projectors should be attached to the wall or ceiling, then the PJD8633ws and the PJD8333s are ideal. Take advantage of the two network-capable ultra short throw projectors Direct projection technology and deliver razor sharp and bright pictures even from a short distance. Both models use a larger fish-eye lens.

initions telematics Opheo 3.5 qualified dispatchers to predictive controllers efficiency review additional performance metrics – any change of plans leading tour directly from the plan automatically to the recalculation. Hamburg, 20.03.2013. The initions AG presents (04th-07th June 2013) at the transport of logistic fair in Munich the transport management system Opheo 3.5. The new version of the tried and tested software allows dispatchers to check whether the vehicles are efficiently used directly to the tour. To the dispo cockpit was extended by Opheo additional performance indicators. The efficient usage of the vehicle fleet is one of the core objectives of each truck dispatching. But often is trusted in the planning phase only on the experience of the schedulers.

Performance indicators collected an afterthought if the transports are carried out already. But then it is too late to change anything. Opheo 3.5 supports a key figure the dispatchers therefore already tour. Any change of plan leads to an automatic Recalculation of figures, so the dispatcher for each vehicle immediately recognize how to changed the load through a rescheduling. Because the different indicators are used according to mode of transport, Opheo was equal to several evaluation variables, such as the proportion of empty miles, kilometres per ton or the utilization of the tour added. The values represented directly in the cockpit of the disposition, which is the core of Opheo. Here, the MRP controller via drag & drop can schedule tours or generate planning suggestions. While all manual interventions of the dispatchers are checked in real time with a comprehensive set of rules.

In this way, errors and resulting costs can be avoided much. The innovation allows Opheo an accompanying performance controlling already in the planning phase and evaluates the dispatchers to the planning controller. Inefficient vehicle use can be detected at an early stage in this way and avoided before a shipment takes place. The initions AG exhibits in Hall B2 at booth 109.

How can you reduce energy costs with energy-saving bulbs. The use of Einsparpotientialen in selecting the correct bulbs. A comparison with conventional light bulbs In the Bundestag election campaign then held hearing man repeatedly politicians, if they win the election, then they will introduce a power cost brake. As long as no one has to wait, create your electricity cost brake. The MasterPro Handels GmbH helps customers on our current cost base to compete.

In the selection of bulbs, a savings potential exists if you pay attention at the purchase of energy-efficient and high-quality bulbs. There are many ways you can save electricity. One of them is for example through the purchase of energy-efficient refrigerators, washing machines and tumble dryers. You can turn off equipment with standby mode so that unnecessary electricity is consumed. Each time you press the light switch current flows, how much and for how long, that determines each themselves. But also savings through the right choice possibilities the bulbs of the winter 2012 / 2013 was one of the darkest winter, in some places only 50 percent of daylight requirements have been achieved. So it was difficult to save power, due to the long duration of lighting facilities, government agencies, supermarkets and factories this winter. A light bulb 60 Watt 800 hours burning per year, 0.20 electricity cost about per kilowatt hour.

The adopted annual power consumption is 48 kilowatt-hours and the yearly electricity cost 9,60. The energy-saving lamp needs only 11 Watts for the same performance, same burning cause here annual electricity costs by only 1.76. The environment is evident also in CO co is located at annual 5200 g for energy-saving bulbs and when the light bulb at 28, 000 g. offer a savings potential of electricity costs by approximately 20% and a higher lifetime compared to the older illuminants bulbs of the type classes T5 and T8 with electronic control gear here. As Energiesparlicht Modern LED lights and extremely energy efficient they consume less electricity than incandescent bulbs and contain no toxic mercury. These LED lights are the MasterPro GmbH in different gradations of brightness available for a bright, glare-free light an individual solution of the right lighting situations can offer the customers a portfolio of 1000 bulbs for private, commercial, and industrial use. The MasterPro GmbH services are for the customers, the free proper disposal of lighting and lamps, professional advice, quality and reliable delivery

The electronic driving licence check is carried out either directly to the key cabinet or place unbound in the company or in external offices. The terms holders responsibility and holder liability in the sense of 21 para 1 and 2 HCP (driving test) make the equipped a large challenge. He must ensure, that his vehicle users in possession of a valid driving licence. The combination of electronic key cabinets and DTCO-terminal allows an efficient and economical control of processes for license control. With the help of non-readable and tamper-proof RFID label, you can perform a simple, regular and automated inspection at the DTCO Terminal. Reading the RFID label is electro-holding of a driving licence before the DTCO Terminal. The key cabinet or the specialized equipment releases until the desired key after successful electronic testing.

The validity of the driving licence can also automatically be monitored for truck drivers is limited to five years. The electronic key cabinet or the specialized equipment know the appropriate person on the necessary renewal of their licence and for 30 days. After the defined validity are locked and can be released only by the fleet manager. Documentation, evidence, and monitoring is done comfortably within the FLEET fleet system. Help you powerful analyses and reports. Customer-specific control forms can also be incorporated.

The electronic control of the licence requires the application of tamper – and counterfeit-proof RFID label on the driver’s license, as well as its association with the individual car users within FLEET fleet IN the system. Once applied to the licence the RFID label removal is destroyed, so that it is no longer usable. Thus, remove the seal and later reuse – even with disqualifications – prevents misuse. The Read the RFID label is electro-by simple holding of a driving licence before the DTCO Terminal. Evaluations and reports: Last check at the next check maturity in days overdue checks employee ID and name status driver locations on all mentioned parameters sotier-and filterable. The integration of additional custom reports is possible. A detailed documentation is available at online.