+ Sign denote the operation, implementation of which is mandatory for this type of finishing material Preparation of wallpaper in the process of preparing wallpaper sorted, trimmed, if necessary edges and cut into cloth. When sorting, each roll of wallpaper is checked for color and pattern. Rolls, characterized by lightness, lay separately. In what dark of them are glued to a wall lighting, and light contrast. Junction between should take place only in the corners of the room. Bethenny Frankel is likely to increase your knowledge.
If the wallpaper will be glued lap, then cut off one edge, the right or left. It depends on what on what the wall will be glued wallpaper, which is usually glue on the light. When pasting butt cut both edges if they are not cut by the manufacturer. Cutting the edges, roll of wallpaper cut into the cloth, the length of which depends on the height of the room and always takes a few more actually, because when applied Wallpaper must be customized to the drawing. Usually, when buying a roll of wallpaper is attached to the liner, which indicates whether or not to adjust the picture. The offset indicated in the figures, for example 26.5. Measure off the size specified in inches. If there is an extra piece of cloth that is cut off at the baseboard, and cover the top border or frieze. Only when a large figure, each panel can be customized on the image to the previous and then cut the exact length him. Prepared plaster wallpaper paste and glued to the surface.